Gubelstrasse 34, Zug 6300, Switzerland

This site is published by Advanced Sterilization Products, which is solely responsible for its contents.

It is intended for healthcare professionals visitors from Europe, Middle East and Africa (EMEA) Region.

© ASP 2020. All rights reserved.

AD-200057-01-CT_A

Privacy NoticeTerms of ServiceContact Us

STERRAD® Systems 
with ALLClear® Technology

can help when things are not perfect. 

Under simulated improper cleaning conditions, STERRAD® NX® System produced: 

• 41 times greater vegetative cells and spore microbicidal rate against V-PRO® maX1
• 100% successful spore microbicidal rate vs.
 V-PRO® maX’s 86% microbicidal failure rate1
• 26 times greater vegetative cells microbicidal rate against V-PRO® maX1
• No significant difference in microbicidal failure rates between STERRAD® NX® System, steam, and ETO1

STERRAD® Systems              Enhanced Safety, Compliance & Operational Efficiency


Get FACTSHEET

1) Rutala et al., Comparative evaluation of the microbicidal activity of low-temperature sterilization technologies to steam sterilization, Infection Control and Hospital Epidemiology (2020), 1-5
2) The research was designed and executed by Actionable Research, an independent third party research firm in conjunction with ChemDAQ® Inc., a manufacturer of environmental safety monitoring systems. The research sponsor was Advanced Sterilization Products. All data were collected by the ChemDAQ® staff.
3) Fastest BI/PCD currently marketed for STERRAD Sterilization Systems. 15 or 30 minutes to result dependent on the software version on the STERRAD VELOCITY® Reader. 15 minutes to result for SW version 1139260410 or greater; 30 minutes to result for SW version 139260317 or below.

Proper cleaning of medical devices is critical.

Uses Hydrogen Peroxide Gas Plasma (HPGP) to safely and rapidly sterilize medical instruments with minimal reports of toxic residue 

67 times less hydrogen peroxide emissions compared to V-PRO® sterilizers for minimal staff exposure to harmful chemicals

STERRAD® Systems have over 23,000 device endorsements from medical device manufacturers 

Works with STERRAD VELOCITY® Biological Indicator (BI) / Process Challenge Device (PCD), the fastest time to read BI at only 15 minutes3

Want to learn more?

DID YOU KNOW...

...that improper cleaning of medical devices has a continuously increasing impact on patient safety? 

Proper cleaning of medical devices is critical.

STERRAD® Systems 
with ALLClear® Technology

can help when things are not perfect. 

STERRAD® Systems      

Enhanced

- Safety

- Compliance

- Operational Efficiency 


1) Rutala et al., Comparative evaluation of the microbicidal activity of low-temperature sterilization technologies to steam sterilization, Infection Control and Hospital Epidemiology (2020), 1-5


2) The research was designed and executed by Actionable Research, an independent third party research firm in conjunction with ChemDAQ® Inc., a manufacturer of environmental safety monitoring systems. The research sponsor was Advanced Sterilization Products. All data were collected by the ChemDAQ® staff.


3) Fastest BI/PCD currently marketed for STERRAD Sterilization Systems. 15 or 30 minutes to result dependent on the software version on the STERRAD VELOCITY® Reader. 15 minutes to result for SW version 1139260410 or greater; 30 minutes to result for SW version 139260317 or below.

Uses Hydrogen Peroxide Gas Plasma (HPGP) to safely and rapidly sterilize medical instruments with minimal reports of toxic residue

Gubelstrasse 34, Zug 6300, Switzerland

This site is published by Advanced Sterilization Products, which is solely responsible for its contents.

It is intended for healthcare professionals visitors from Europe, Middle East and Africa (EMEA) Region.

© ASP 2020. All rights reserved.

AD-200057-01-CT_A